LTC2944

Features

  • Measures Accumulated Battery Charge and Discharge
  • 3.6V to 60V Operating Range for Multiple Cells
  • 14-Bit ADC Measures Voltage, Current and Temperature
  • 1% Voltage, Current and Charge Accuracy
  • ±50mV Sense Voltage Range
  • High Side Sense
  • I2C Interface/SMBus Interface
  • General Purpose Measurements for Any Battery Chemistry and Capacity
  • Configurable Alert Output/Charge Complete Input
  • Quiescent Current Less Than 150μA
  • Small 8-Lead 3mm × 3mm DFN Package

Typical Application

LTC2944 Typical Application
LTC2944 Typical Application

Description

The LTC®2944 measures battery charge state, battery voltage, battery current and its own temperature in portable product applications. The wide input voltage range allows use with multicell batteries up to 60V. A precision coulomb counter integrates current through a sense resistor between the battery’s positive terminal and the load or charger. Voltage, current and temperature are measured with an internal 14-bit No Latency ΔΣ™ ADC. The measurements are stored in internal registers accessible via the onboard I2C/SMBus Interface.

The LTC2944 features programmable high and low thresholds for all four measured quantities. If a programmed threshold is exceeded, the device communicates an alert using either the SMBus alert protocol or by setting a flag in the internal status register. The LTC2944 requires only a single low value sense resistor to set the measured current range.

Applications

  • Electric and Hybrid Electric Vehicles
  • Power Tools
  • Electric Bicycles, Motorcycles, Scooters
  • High Power Portable Equipment
  • Photo Voltaics
  • Backup Battery Systems